How to Upload Images From Rebel T6

Solution

Introduction

You tin can salve images from the camera to a smartphone using the following methods.

●　Connecting via Bluetooth*

When you connect the camera to a Bluetooth-compatible smartphone via Bluetooth, yous can establish a Wi-Fi connection by operating only the camera or the smartphone.

Note that pairing betwixt the camera and smartphone is required to connect the photographic camera to a smartphone via Bluetooth.

*This camera is Bluetooth 4.1 (Bluetooth low energy technology) compliant. To connect, your smartphone must be compatible with Bluetooth low free energy technology.

●　Connecting via NFC

NFC-compatible smartphones can be connected via Wi-Fi by touching them to the camera.

●　Connecting with the < > button

This photographic camera enables you to establish a Wi-Fi connection past displaying the Wi-Fi part card with the　< > push.

Of import

• Earlier connecting to the camera, you must install the free dedicated Camera Connect app on the smartphone.
• Make certain that the smartphone's Wi-Fi function is on.

Preparation: Installing Camera Connect on a Smartphone

To connect the camera to a smartphone, a smartphone on which Android or iOS is installed is necessary. In addition, the dedicated application Camera Connect (free of charge) must be installed on the smartphone.

• Camera Connect tin exist installed from the Google Play or App Store.
• When an NFC-compatible smartphone is touched to the photographic camera before installing Photographic camera Connect, the download screen of Camera Connect will be displayed on the smartphone.

Important

• For the operating system versions supported by Photographic camera Connect, refer to the "Related data" department below.
• Interface or functions of the camera and Camera Connect are subject to modify for firmware update of the photographic camera or awarding update of Camera Connect, Android, iOS, etc. In such a case, features of the photographic camera or Photographic camera Connect may differ from sample screens or operation instructions in this manual.

Step ane: Basic Camera Settings

Configure necessary settings before using the wireless LAN functions of the camera.

1. Plough on the camera.

• Set the photographic camera'southward power switch to <ON>.

two. Press the < > button.

3. Select [Wi-Fi settings].

four. Select [Wi-Fi].

5. Select [Enable].

6. When the screen beneath appears, press < >.

seven. Enter the nickname. Y'all can enter whatever characters between 1 to viii characters in length.

When you finish entering characters, press the <MENU> button.

*For more information on using the keyboard, refer to "Operation Reference: Virtual Keyboard Functioning".

Note

When making Wi-Fi settings for the first time, a screen will appear for y'all to annals a nickname for the camera (for identification).

This nickname will be displayed on the screen of target devices when connecting to other devices via Wi-Fi. Be sure to ready a nickname equally otherwise you cannot go to the wireless LAN settings screen.

eight. When the screen below appears, select [OK], and then printing < >.

To go dorsum to the screen that was displayed when you pressed < >, press the <MENU> button.

nine. The [Wireless communication settings] screen will appear.

This concludes the explanation for basic camera settings.

Depending on the connectedness method, choose one of the post-obit and proceed to:

• Footstep 2-A: Connecting via Bluetooth
• Step two-B: Connecting via NFC
• Footstep two-C: Connecting with the Wi-Fi button

Step 2-A: Connecting via Bluetooth

IMPORTANT

• This camera is Bluetooth 4.1 (Bluetooth depression energy applied science) compliant. To connect, your smartphone must be compatible with Bluetooth low free energy engineering science.
• Pairing is not possible while shooting with the camera.
• The camera cannot be connected to 2 or more devices at the aforementioned time via Bluetooth.
• Bluetooth connection consumes bombardment power even afterward the camera'due south auto ability off has activated. Therefore, the battery level may be low when you use the camera.

ii-A-one. Select [Bluetooth function].

2-A-2. Select [Bluetooth part].

2-A-3. Select [Smartphone].

NOTE

< > volition appear on the camera's LCD monitor.

two-A-4. Select [Pairing].

2-A-5. Select [Do non brandish].

Pairing volition get-go.

2-A-6. Enable the Bluetooth part on the settings screen of the smartphone, and so get-go Photographic camera Connect.

2-A-7. Select the camera to pair with.

• Tap on the nickname of the camera to be paired.

• iOS: When the screen below appears, tap on [Pair].

ii-A-eight. Select [OK].

: The device name set on Camera Connect

2-A-9. Press < >.

Pairing will complete and the camera volition exist connected to the smartphone via Bluetooth.

Go along to "Step 3-A: Sending Images to a Bluetooth-compatible Smartphone".

Step 2-B: Connecting via NFC

Of import

• The camera cannot be continued to two or more smartphones at the same time.
• When touching the smartphone to the camera, be careful non to drop the photographic camera or smartphone.
• Exercise not touch the smartphone to the photographic camera with too much force. Doing so can scratch the camera or smartphone.
• But holding the smartphone close to the camera may not establish a connexion. Be certain to touch the camera with the smartphone so that they come into contact with each other.
• Recognition may be difficult depending on the smartphone. Touch slowly while irresolute the position or rotating horizontally. If connection is not established, keep the camera and smartphone together until the camera screen is updated.
• Some other application on the smartphone may showtime depending on how you touch. Check the position of the mark, then bear upon again.
• When touching the smartphone to the camera, do not exit annihilation between the photographic camera and smartphone. In addition, when a case is attached to the photographic camera or smartphone, Wi-Fi connectedness with the NFC function may not be possible.
• A Wi-Fi connection cannot be established with the NFC part between this camera and a smartphone while they are connected via Bluetooth.
• To connect this camera to an NFC-compatible smartphone via Wi-Fi, the smartphone's Wi-Fi and NFC functions must exist enabled.

• A Wi-Fi connectedness cannot be established with the NFC office betwixt this camera and another NFC-uniform device such equally a camera or printer.
• A Wi-Fi connectedness cannot be established with the NFC office while shooting with this photographic camera, when there is no card, when the LCD monitor is closed with the screen facing inwards, or while the camera is continued to another device with an interface cable.

2-B-1. Enable the NFC role on the camera and smartphone.

2-B-ii. Touch a smartphone to the camera.

Notation

When a message indicating the connection is being established is displayed on the camera's LCD monitor, move the smartphone away from the camera.

Camera Connect starts on the smartphone and establishes a connection.

ii-B-3. When a connectedness is established, the screen beneath will appear on the camera's LCD monitor.

Select [OK] and press < >.

: The device name set on Photographic camera Connect

2-B-4. A bulletin indicating that the connexion has been established is displayed and the [ Wi-Fi on] screen is displayed.

Note

If the camera screen switches during the smartphone operation procedures, press the < > button to return to the [ Wi-Fi on] screen.

Proceed to "Stride 3-B: Viewing and Saving Images with a Smartphone".

Pace two-C: Connecting with the Wi-Fi Button

2-C-1. Select [Wi-Fi function].

2-C-2. Select [ ] (Connect to smartphone).

2-C-3. Select [Register a device for connection].

2-C-4. Select [Do not display].

2-C-five. Check the SSID and password.

Annotation

"_Canon0A" is displayed at the end of the SSID.

2-C-6. Operate the smartphone to establish a Wi-Fi connection.

2-C-7. When the [Waiting to connect] screen is displayed on the camera's LCD monitor, start Photographic camera Connect on the smartphone.

2-C-8. Select and tap on the photographic camera to connect to via Wi-Fi from [Cameras] on Camera Connect.

2-C-9. When a connection is established, the screen beneath will appear on the photographic camera's LCD monitor.

Select [OK] and press < >.

: The device name ready on Camera Connect

2-C-10. A message indicating that the connection has been established is displayed and the [ Wi-Fi on] screen is displayed.

Note

If the camera screen switches during the smartphone operation procedures, printing the < > push to return to the [ Wi-Fi on] screen.

Go on to "Stride 3-B: Viewing and Saving Images with a Smartphone".

Pace 3-A: Sending Images to a Bluetooth-compatible Smartphone

3-A-i. Bear on [Images on camera] in Camera Connect.

• Android: When you select [Images on camera] in Camera Connect, a Wi-Fi connexion volition be automatically established.
• iOS: On the smartphone'south Wi-Fi role screen, select the SSID (network name) and countersign displayed on the camera to establish a connection.

3-A-two. The [ Wi-Fi on] screen will announced.

Notation

If the camera screen switches during the smartphone operation procedures, press the < > button to render to the [ Wi-Fi on] screen.

3-A-3. Operate the smartphone to send images stored in the photographic camera to the smartphone.

When a list of images in the photographic camera appears on the smartphone, tap [Select] on the upper right of screen.

3-A-iv. When the selection screen appears, choose the desired images ( ), then touch [Salvage] [ ] ( ). The selected images volition be saved to the smartphone.

3-A-five. Afterwards the images have been sent, tap on [ ] on the upper correct, so impact [ ] on the upper left of the screen to render to the menu.

3-A-6. To terminate the Wi-Fi connection, tap on [ ] on the upper right, and then bear upon [Yes].

NOTE

• To terminate the Wi-Fi connexion, perform either of the following operations.

- On the smartphone's Camera Connect screen, tap on [ ].

- On the photographic camera's [ Wi-Fi on] screen, select [Disconnect, get out].

• Terminating the Wi-Fi connectedness will switch the camera to the Bluetooth connexion.
• You lot can bank check the connection status on the Camera Connect master screen:

Of import

• With a Wi-Fi connection to a smartphone established, certain functions are unavailable.
• Depending on the advice status, epitome display may exist delayed.
• When saving images to a smartphone, you cannot take a picture show fifty-fifty if you printing the camera'south shutter button. Also, the camera'southward LCD monitor may plow off.

Notation

• The Wi-Fi connexion volition be terminated if you ready the photographic camera's power to <OFF> or open the card slot/battery compartment cover.
• RAW images cannot be saved to a smartphone. When a RAW epitome is selected, it volition exist saved every bit a JPEG image.
• With a Wi-Fi connexion established, the camera'due south auto ability off does non function.
• With a Wi-Fi connection established, disabling the smartphone'south ability saving part is recommended.

Step 3-B: Viewing and Saving Images with the Smartphone

3-B-1. Touch [Images on camera] in Camera Connect.

three-B-2. Use your smartphone to import images from the camera to the smartphone.

When a list of the images on the photographic camera appears on the smartphone, tap [Select] on the upper correct of the screen.

three-B-3. When the selection screen appears, choose the desired images ( ), and so impact [ ] ( ) on the bottom right of the screen. The selected images will be saved to the smartphone.

3-B-iv. Subsequently the images take been saved, bear upon [ ] on the top right, and then bear upon [ ] on the upper left of the screen to return to the menu screen.

three-B-5. To cease the connection, touch the [ ] icon on the upper right of the screen, and and so tap [Yep] when the confirmation screen appears.

*Android™, and Google Play™ are trademarks of Google Inc.

Operation Reference: Virtual Keyboard Operation

For details on keyboard operation when registering photographic camera's nickname, refer to the post-obit.

You lot tin change the nickname later on on the [Wireless communication settings] screen.

thomaswhismainfits.blogspot.com

Source: https://in.canon/en/support/8203566000

Share this post